+44 33 00272025 Mon.- Fri. 8:00 - 16:00
 
 
Wishlist
 
Basket
is empty

Tempered glass, protective films for Lenovo Tab M10 Plus 10.3

FILTERS
show
SHOW ON PAGE
show
Show available
Show

 

 

Safe screen: glass or protective film on the Lenovo Tab M10 Plus 10.3

Complex protection of the tablet requires covering both the body and the touch screen. However, in addition to such protection, tempered glass may also be useful, which is another protective layer of the most delicate part of the device.

Protect your Lenovo effectively

The 10.3" display almost asks for extra protection against cracks and scratches. Sticking a glass or protective film increases the tablet's chances of avoiding injury from falling or hitting. Unaesthetic scratches will not appear on the display surface either. If you need to remove the glass or film, you do not need to worry about ugly adhesive residue. Glass or a protective glass pane is completely invisible and quite pleasant to the touch. Toughened tablet glass is even more important when falling. At this point, it takes over the force of the impact and, in the worst case, it breaks. However, the screen of the device remains intact.

Glass with hardness 9H

Toughened glass designed to protect popular tablet models, usually has the 9H designation. It defines the hardness class of the material it is made of. Thus, for example, if we choose tempered glass for Lenovo Tab M10 Plus 10.3, we will get a layer so hard that it could cut the glass and it will scratch itself only with a diamond blade.

Mounting a protective glass on the tablet

Tempered tablet glass is very easy to install. First of all, clean the tablet screen from dust and other stains, especially greasy fingerprints. Special cloths soaked in alcohol, followed by dry cloths for polishing screens or even glasses, will be useful. The next step is to hold the edge of protection glass and remove the protective film from it. Once this has been done, it is enough to apply it slowly and carefully to the device, making sure that there are no displacements in relation to the edges and buttons. Once the glass has been fitted, just press it slightly.